main feature:

g) Configurable backup power supply (optional), the main power and backup power are automatically switched and the backup power working status icon is displayed intuitively in the menu bar;

h) The alarm channel number, alarm status and alarm time can be directly queried through the menu;

i) The short-distance RTU wireless transmission method or the unlimited-distance GPRS wireless transmission method can transmit real-time detection data and alarm status to the safety center through the built-in wireless module (optional); 

The main function:

Alarm function

When the following situations occur, the controller will send out an audible and visual alarm signal:

a) When the measured gas concentration exceeds the set first-level (A1 low alarm) alarm value or second-level (A2 high alarm) alarm value, the buzzer will make continuous beeps, the concentration alarm indicator light is on, and the public relay is activated. combine;

b) When the controller is connected to the gas detector circuit and there is a failure, such as: no signal output, transmission line disconnection, transmission line short circuit, gas detector signal output exceeds the measurement range, the buzzer will beep continuously, and the fault alarm will be issued at the same time The indicator light is on, and the public relay is closed;

c) When the main power is cut off and the controller is powered by the backup power, the buzzer will beep briefly, and when the voltage of the backup power is insufficient, the buzzer will beep continuously.

Self-test function

Self-inspection when starting up, the controller automatically checks the functions of the indicator lights and buzzers on its panel. The instrument self-test menu can also perform functional self-test on the status indicator, buzzer and relay.

Data logging function

Through the menu, you can directly query historical data records and real-time curves, and you can customize the data saving interval. When the gas concentration of a certain channel exceeds the set alarm value, the alarm channel number, alarm concentration value and alarm time will be automatically recorded.

Parameter setting function

The working parameters of the controller can be viewed and modified at any time, including the current date/time, measurement range, resolution, alarm values at all levels, channel shielding, installation location, etc.

Main and backup power automatic switching function

When the main power supply of the controller is cut off, it can automatically switch to the backup power supply; when the main power supply is restored, it can automatically switch to the main power supply; the working status of the main and backup power supplies is indicated by an indicator light. When the main power supply is working, it can charge the backup power supply at the same time, and it will automatically turn to the floating charge state after the backup power is fully charged.

Alarm output control function

The controller has 2 public alarm output relays and 8 programmable alarm output relays. Equipment for controlling fire-fighting equipment, ventilation equipment, alarm equipment or other purposes. .

Current Calibration Function

The controller can calibrate the input current signals of 4mA, 12mA and 20mA to ensure timely synchronization of signals.

communication function

The controller has 3 RS-485 ports and 1 Ethernet port, which can easily transmit data to other control devices, computers, etc. The default address of the controller is: 5, and the baud rate is: 9600.
Other functions

Display of the total number of alarm channels, 4~20mA current signal output, etc.

Product parameters: