Pumped Propane Gas Analyzer
Pumped Propane Gas Analyzer

Product Overview:

Product overview: The pump-suction gas analyzer is an intelligent high-performance analysis and detection instrument that can continuously monitor the measured gas and has the function of people falling alarm.The optional wireless function of the instrument allows security personnel to obtain real-time instrument data and alarm status from anywhere.Intuitive data display, super large 3.2-inch full-color high-definition large screen, faster response speed, and military-quality shell design raise the safety protection of workers to a whole new level.
Parameters: ◆High-performance intelligent sensor, with a service life of more than 2-3 years;
Parameters: ◆Active pump suction type, short response time, embedded 32-bit ultra-low power consumption microprocessor, small detection error and high resolution;
Parameters: ◆Built-in temperature and humidity sensor, real-time display of ambient temperature and humidity;
Parameters: ◆Intelligent temperature and humidity and zero point compensation algorithm, full software automatic calibration function for target points from level 2 to level 4, to ensure the accuracy of measurement results; automatically detect the working status of each sensor and components when starting up;
Parameters: ◆3.2-inch full-color super large display screen, large and clear background light can display measurement information under any lighting conditions, easy-to-understand UI color icon menu, friendly user interface with 7-key navigation, showing the humanity of the design internationalization;
Product characteristics and parameters ▼

◆ Support free switch between PPM and mg /m3 %VOL and mg /L concentration units, and support free switch between Chinese and English operation
interfaces ; Mobile power supply and charging, compatible with universal USB port mobile phone charger;
◆ The shell combined with engineering plastics and high-strength wear-resistant aluminum, the quality assurance of military industry quality; reasonable and scientific air circuit and air chamber design, try to avoid the sensor from being affected by the environment Interference; protection level IP66 ;
◆Automatically store data, the storage interval can be customized, and can store 300,000 sets of data with date and time marks, such as (optional) micro TF memory card, which can store more than million sets;
◆ Short distance RTU433 The real-time detection data and alarm status can be transmitted to the safety center (optional) through the built-in wireless module function through the wireless transmission mode of wireless transmission mode or GPRS wireless transmission mode with unlimited distance anywhere ;
◆ SupportUSB and RS232 serial port mode measurement data download, support miniature portable printer serial port or Bluetooth wireless printing (optional) .

 Product parameters:

Gas detection

Propane in air (C3H8)

Detection principle

Infrared principle

Measuring range

0-2%Vol, 0-5%Vol, 0-50%Vol, 100%Vol optional

resolution

0.01%Vol (0-100%Vol)

Sampling method

Active pumping type, the built-in air pump can be opened or closed independently, the flow rate is 500mL/min

Indication error

≤±3% FS (higher accuracy requirements based on sensor performance)

repeatability

≤±1%

zero drift

≤±1% (FS/year)

Response time

≤20 seconds (T90)

Recovery Time

≤20 seconds

size

Length 270mm × height 193mm × width 106mm

shell material

Engineering plastic + 304 stainless steel + high-strength wear-resistant and corrosion-resistant aluminum alloy

weight

2.1kg

Battery

Super large capacity rechargeable lithium battery 11000mAh, single gas working time is more than 32 hours, six-in-one gas working time is more than 24 hours, charging time is less than 9 hours), support mobile power supply and charging

charger

Square port USB charger, compatible with universal USB port mobile phone chargers

Alarm method

Sound alarm 95 dB@30cm, red LED alarm light, personnel fall alarm; short-distance wireless and long-distance GPRS wireless alarm mode (optional)

show

3.2-inch TFT high-definition large color screen

button

7-key navigation key

direct reading

Measured value, data recording status, pump working status, maximum value, minimum value, average value;
built-in temperature and humidity sensor, real-time display of ambient temperature and humidity

data record

Automatically store data, the storage interval can be customized, can continuously store 300,000 sets of data with date and time, optional micro TF memory card, can store more than 5 million sets

data transmission

Support USB and RS232 serial port measurement data download and transmission, support GPRS wireless transmission or short-distance RTU433 wireless transmission (optional)

data printing

Support miniature portable printer serial port or bluetooth wireless printing (optional)

calibration

Target point calibration function from level 2 to level 4 or above, calibration calibration value can be set, one-key zero adjustment

Explosion-proof grade

Ex ia IIC T4 Ga (intrinsically safe)

degree of protection

IP65

operating mode

Two operating modes, user mode and administrator mode, are available

Environmental pressure

86kPa~106kPa

ambient temperature

-20°C~+55°C (typical value) -40°C~+70°C (limit value)
(Higher temperature and humidity requirements can be equipped with a high temperature sampling handle to detect gases with a temperature up to about 800°C)

environment humidity

10%~95%RH (no condensation)

Executive standard

GB 12358-2006, GB 3836.1-2010, GB 3836.4-2010

quality assurance

One year warranty period, free maintenance during the warranty period.