Pump Suction Portable Carbon Dioxide Detection Alarm Instrument
Pump Suction Portable Carbon Dioxide Detection Alarm Instrument

Product Overview:

Product overview: HYE 2000 pump-suction portable gas detection and alarm instrument adopts imported high-performance sensors. It is an intelligent high-performance detection and alarm instrument that can continuously monitor the measured gas and has the function of personnel fall alarm.The instrument has a built-in temperature and humidity sensor to display the ambient temperature and humidity in real time.The optional wireless function of the HYE2000 pump-suction portable gas detection and alarm instrument allows security personnel to obtain instrument data and alarm status in real time anywhere.Intuitive data display and faster response speed raise the safety protection of workers to a whole new level
Parameters: ◆High-performance intelligent sensor, with a service life of more than 2-3 years;
Parameters: ◆Active pump suction type, short response time, embedded 32-bit ultra-low power consumption microprocessor, small detection error and high resolution;
Parameters: ◆Built-in temperature and humidity sensor, real-time display of ambient temperature and humidity;
Parameters: ◆Intelligent temperature and humidity and zero point compensation algorithm, full software automatic calibration function for target points from level 2 to level 4, to ensure the accuracy of measurement results; automatically detect the working status of each sensor and components when starting up;
Parameters: ◆2.3-inch full-color display screen, large and clear background light can display measurement information under any lighting conditions, easy-to-understand UI color icon menu, friendly user interface with 7-key navigation, showing the humanization of the design ,globalization;
Product characteristics and parameters ▼

Product features :
◆ Support PPM and mg/m3, %VOL and mg/L concentration unit free switching, and support free switching of Chinese and English operation interfaces;
◆ Standard configuration of 6000 mAh large-capacity lithium battery, continuous working time is more than 30 hours; Support mobile power supply and charging, compatible with universal USB port mobile phone charger;
◆ High-strength wear-resistant polycarbonate shell, strong, waterproof, anti-corrosion, and anti-electromagnetic radiation; reasonable and scientific gas path and air chamber design, try to avoid the sensor from environmental interference ; Protection grade reaches IP66.
◆Automatically store data, the storage interval can be customized, and can store 300,000 sets of data with date and time marks. If a micro TF memory card is selected, it can store more than 10 million sets;
◆ Short-distance RTU433 wireless transmission mode or unlimited distance All GPRS wireless transmission methods can transmit real-time detection data and alarm status to the safety center through the built-in wireless module function (optional);
◆ Support USB measurement data download, support miniature portable printer Bluetooth wireless printing

Product parameters :

product name

Pump Suction Portable Carbon Dioxide Detection Alarm Instrument

Product number

HYE2000-CO2

Gas detection

carbon dioxide (CO2) in the air)

Detection principle

Infrared principle

Measuring range

0-500ppm, 1000ppm, 2000ppm, 5000ppm, 50000ppm, 0-1%VOL, 2%VOL, 5%VOL, 10%VOL, 20%VOL, 30%VOL, 50%VOL, 100%VOL optional

resolution

0.1ppm (0-1000ppm); 1ppm (above 1000ppm); 0.01%Vol (0-100%Vol)

Sampling method

Active pump suction type, the built-in air pump can be opened or closed independently, the air pump flow rate is 500ml/min

Indication error

≤±3% FS (higher accuracy requirements based on sensor performance)

repeatability

≤±1%

zero drift

≤±1% (FS/year)

Response time

≤20 seconds (T90), (higher requirements based on sensor performance)

Recovery Time

≤30 seconds (higher requirements based on sensor performance)

size

Length 80mm x height 200mm x width 58mm

shell material

High-strength and wear-resistant polycarbonate shell + stainless steel

weight

0.52kg

Battery

Large-capacity rechargeable lithium battery 6000mAh, continuous working time more than 30 hours, charging time less than 7 hours, support mobile power supply and charging; compatible with universal USB mobile phone charger

charger

USB high current 5V 2.1A fast charger;

Alarm method

Sound alarm 95 dB@30cm, vibration alarm, red LED alarm light, personnel fall alarm; short-distance wireless and long-distance GPRS wireless alarm mode (optional)

Alarm point setting

A1 alarm value, A2 alarm value; TWA alarm value, STEL alarm value can be set separately

display screen

2.3 inch TFT large color screen

button

7-key navigation key

direct reading

Measured value, data recording status, pump working status, ambient temperature, humidity

data record

Automatically store data, the storage interval can be customized, and can continuously store 300,000 sets of data with date and time, and can store more than 10 million sets of data with optional micro TF memory card;

data transmission

Support USB measurement data download and transmission; support GPRS wireless transmission or short-distance RTU433 wireless transmission (optional)

data printing

Support miniature portable printer Bluetooth wireless printing (optional)

calibration

Level 2 to level 4 target point calibration function, calibration calibration value can be set, one-key zero adjustment

Explosion-proof grade

Ex ib ⅡC T4 Gb ((intrinsically safe)   

degree of protection

IP65

operating mode

Two operating modes, user mode and administrator mode, are available

Environmental pressure

86kPa~106kPa

ambient temperature

-20°C~+55°C (typical value) -40°C~+70°C (limit value)
(Higher temperature and humidity requirements can be equipped with a high temperature sampling handle to detect gases with a temperature up to about 800°C)

environment humidity

10%~95%RH (no condensation)

Executive standard

GB 12358-2006, GB 3836.1-2010, GB 3836.4-2010

quality assurance

One year warranty period, free maintenance during the warranty period.